Developing Predictive Models for Disease Outbreaks Using AI and Big Data

Project academic year
Abstract
This project presents an intelligent web-based platform for disease outbreak prediction and personalized health analysis. The system integrates a hybrid XGBoost–LightGBM model, interactive dashboards, outbreak visualization, and a multi-agent chatbot. Developed using Next.js, FastAPI, and Supabase, the platform enables real-time monitoring, prediction, and health support. The proposed model achieved an R² value of 0.8592, demonstrating reliable predictive performance.
Full Description
In recent years, the need for intelligent web-based platforms in public health has increased due to limitations in traditional disease monitoring systems, which rely on delayed and static data. This project developed a scalable web application for disease outbreak prediction and personalized health analysis. The system was implemented using Next.js for the frontend and FastAPI for the backend, with deployment on Vercel and Hugging Face. Supabase was used for authentication and database management. A machine learning model was integrated to analyze disease data and generate predictions, while asynchronous processing and lazy loading were applied to improve performance and prevent server blocking. The system also included a multi-agent AI chatbot using the OpenAI API to provide personalized health recommendations.The proposed hybrid XGBoost–LightGBM model achieved good predictive performance with an R² value of 0.8592, indicating reliable disease outbreak forecasting capability. Results showed that the platform enabled real-time visualization, efficient data processing, and improved user interaction through dashboards and alerts. The proposed system provides an effective and scalable solution for combining outbreak monitoring withIindividualIhealthIsupport.
Keywords
Big data
AI
disease monitoring system
health care
Project Poster
project pooster

Design of Natural Hybrid Composite for Prosthetics Denture

Project academic year
Abstract
This study investigates the design and evaluation of a natural hybrid nanocomposite material based on polymethyl methacrylate (PMMA) reinforced with hydroxyapatite (HA) and eggshell powder (ESP) for use as a prosthetic denture base material. PMMA has long been the standard material for denture fabrication due to its biocompatibility and ease of processing. However, its relatively poor mechanical properties — including low fracture toughness, brittleness, and limited flexural strength — remain a significant clinical concern. To address these limitations, natural fillers were incorporated as eco-friendly and biocompatible reinforcing agents. Four specimen groups were prepared using a cold-cure hand lay-up method: pure PMMA (control), and three reinforced groups containing 3 wt.% ESP combined with 1, 3, and 5 wt.% HA, respectively. Mechanical testing included compression, bending, and Vickers hardness tests, while physical testing covered water absorption and density measurements. Results showed that increasing HA content significantly improved bending strength — from 46.08 MPa in pure PMMA up to 71.76 MPa at 5 wt.% HA — and surface hardness, which rose from 8.14 HV to 16.00 HV. Compressive strength remained relatively stable across all groups. Water absorption was lowest in the 3HA–3ESP group (1.29%), and density increased with filler addition, peaking at 1.022 g/cm³ for the same group. These findings suggest that PMMA reinforced with hydroxyapatite and eggshell powder offers improved mechanical and physical properties, making it a promising, sustainable, and biologically compatible alternative for denture base applications.
Keywords
PMMA
hydroxyapatite
egg shell powder
denture composite

Preparation of Biodegradable Polymer Composite for bone fixation

Project academic year
Abstract
This study presents the preparation and characterization of a biodegradable polymer composite based on Polylactic Acid (PLA), Chitosan (CH), and Hydroxyapatite (HA) for potential applications in bone fixation and tissue engineering. PLA was selected as the primary biodegradable polymer matrix due to its favorable biocompatibility and biodegradability, while chitosan and hydroxyapatite were incorporated to enhance the biological and mechanical performance of the composite. Several composite formulations with different concentrations of CH and HA were fabricated using the solvent casting technique with chloroform as a solvent. The preparation process involved magnetic stirring, ultrasonic treatment, and casting in glass Petri dishes to improve homogeneity and reduce structural defects. Different experimental trials were conducted to optimize the fabrication procedure and achieve uniform composite samples with minimal air bubble formation and improved structural integrity. The prepared samples were characterized through hardness testing, surface roughness analysis, water absorption evaluation, and antibacterial activity assessment to determine their suitability for biomedical applications. The results demonstrated that the incorporation of hydroxyapatite and chitosan significantly influenced the physical and mechanical properties of the prepared composites. The sample containing 3% CH and 1.5% HA exhibited the highest hardness value, indicating enhanced mechanical stability due to the reinforcing effect of the ceramic phase. In addition, the composite containing 2% CH and 1% HA showed the lowest surface roughness value, suggesting improved filler dispersion and surface uniformity. Overall, the developed PLA/CH/HA biodegradable composites demonstrated promising characteristics for potential use in temporary bone fixation devices and orthopedic applications. The combination of biodegradability, improved mechanical behavior, and bioactive properties suggests that these composites may provide an effective alternative to conventional non-biodegradable fixation materials.
Keywords
PLA
Chitosan
Hydroxyapatite
bone fixation

simulation and practical improvement of elevator control system using Siemens plc and HMI

Project academic year
Abstract
This project focuses on the design and control of an elevator system using a Programmable Logic Controller (PLC). The primary objective is to create a reliable, efficient, and safe elevator system that operates seamlessly through PLC-based control. The elevator system is designed to serve three floors and integrates key functionalities, including floor selection, door control, and safety mechanisms. A PLC is employed to manage system operations through programmed logic, ensuring smooth movement, door control, and emergency responses. The project involves designing the mechanical and electrical components of the elevator, selecting appropriate sensors and actuators, and programming the PLC to manage these components effectively. Key safety features, such as fire protection, passenger detection, and emergency stop functions, are incorporated to ensure system reliability and user safety. The performance of the system was tested and validated practically, ensuring that it meets the required operational standards. This project provides an integrated solution for elevator control, offering insights into the practical applications of PLCs in modern elevator systems and contributing to the advancement of automation technology in building infrastructure.
Keywords
Programmable Logic Controller (PLC), Elevator Control System, and Ladder Logic Programming.

Stress Analysis of Compound Die Parts Using ANSYS Software

Project academic year
Abstract
The project consists of three parts (theoretical, simulation, and practical). The theoretical part related to calculating the dimensions of active parts (cutting tools) of the compound die was accomplished using mathematical equations specific to the design of cutting dies. The simulation part was implemented using ANSYS program. This program was used to draw the active parts of the compound die, build a model of this die, and then perform a simulation of the cutting process of sheet metal using the compound die, and then analyze the stresses for the cutting tools. The practical part which is related to manufacturing the compound die cutting tools with the product (circular washer) was completed using a 3D printer.
Keywords
Stress analysis
Compound Die
Numerical Modeling

Design and Simulation of an Automated Manufacturing Line using TIA Portal, Factory I/O, Siemens PIC and Automation Studio

Project academic year
Abstract
In this study, within the scope of the graduation study in the University of Baghdad Electrical Engineering Department; an automatic control system of a production facility is designed with a PLC-based automation program. A PLC from the SIEMENS S7 1200 family was used in the automation system installed. With the new production understanding in today's industry, it has become important that production is controlled and fast. Based on this new understanding, the subject of my thesis has been determined as the design of a facility that performs the separation, processing and packaging of the produced material in a controlled manner.The production process to be designed in this facility aims to separate the products due to their various characteristics, then to process each of these products one by one, to cover the processed products by their lids, then to put each of them in boxes and leave them as a package, and each of them to be shelved one by one. Most of the manufacturing was done by robots in order to minimize human power throughout the entire manufacturing process. Likewise, errors were minimized by using robotic systems and automatic control systems in the manufacturing. This facility was programmed through TIA Portal and simulated by Factory IO.
Keywords
Programmable Logic Controller (PLC), Siemens S7-1200, Industrial Automation, TIA Portal, and Factor