Design of Natural Hybrid Composite for Prosthetics Denture

Project academic year
Abstract
This study investigates the design and evaluation of a natural hybrid nanocomposite material based on polymethyl methacrylate (PMMA) reinforced with hydroxyapatite (HA) and eggshell powder (ESP) for use as a prosthetic denture base material. PMMA has long been the standard material for denture fabrication due to its biocompatibility and ease of processing. However, its relatively poor mechanical properties — including low fracture toughness, brittleness, and limited flexural strength — remain a significant clinical concern. To address these limitations, natural fillers were incorporated as eco-friendly and biocompatible reinforcing agents. Four specimen groups were prepared using a cold-cure hand lay-up method: pure PMMA (control), and three reinforced groups containing 3 wt.% ESP combined with 1, 3, and 5 wt.% HA, respectively. Mechanical testing included compression, bending, and Vickers hardness tests, while physical testing covered water absorption and density measurements. Results showed that increasing HA content significantly improved bending strength — from 46.08 MPa in pure PMMA up to 71.76 MPa at 5 wt.% HA — and surface hardness, which rose from 8.14 HV to 16.00 HV. Compressive strength remained relatively stable across all groups. Water absorption was lowest in the 3HA–3ESP group (1.29%), and density increased with filler addition, peaking at 1.022 g/cm³ for the same group. These findings suggest that PMMA reinforced with hydroxyapatite and eggshell powder offers improved mechanical and physical properties, making it a promising, sustainable, and biologically compatible alternative for denture base applications.
الكلمات المفتاحية
PMMA
hydroxyapatite
egg shell powder
denture composite
الجهات المستفيدة